Hold SNP25 to ensure immediate action

Immediacy

To hold SNP25 product and ensure an immediate action it has been designed  a specific temporary Storage that can contain up to 500 kg of explosive. This Storage is aimed at storage for direct consumption of SNP25 used to remove snow accumulations that could cause dangerous Avalanches in the defined ski area.

Safety

The wood construction certified REI30  will have to be positioned on an equipped area, provided with fence of adequate height also in anticipation of heavy snowfall, snit-theft system and video surveillance and it have to be located in an isolated area with a safety distance of 100 m from other buildings or potential dangers (roads, houses, factories, skilifts, ect.)

Supply

ATM Srl proposes to its customers the supply of the temporary storage for SNP25 explosive with characteristics in line with the guidelines provided by the current regulations. The choice of the area where locate the Storage and create the reserved area will be identified after a direct comparison with the ski area or the institution interested in the keeping of the explosive product.

The dimension of the shed is 200cmx200cm. The equipped area in which position the shed must be in a flat area with dimensions 13×13 m. This area will have to be delimited with a fence with a height of 3,5m in order to ensure a right prevention against intrusions. The perimeter will have to be subjected to video surveillance. In the centre will be realised an emplacement in reinforced concrete, raised at least 30 cm with respect to the walkable area, with dimensions of 4x4m. The shed will be placed in the centre of the emplacement with suitable anchoring means; in this way the shed will be surrounded by a sloping outwards sidewalk for the regular drain of the rain water or the snow melting from the roof.

It is a laminated sprust wooden hut GL24H with internal dimension of 200 x 200 cm, external walls thickness 10 cm, gabled roof, internal height in the eaves h. 200 cm, heigh in full h. 250 cm, cover with gutters from 50 cm projection for every side, support structure in larch beams, cover in sandwich panel thickness 40 mm., finishing in brown sheet and single-wing door 80 x 200 h. cm.

 

All the laminated sprust wooden material GLH24 is treated with anti-woodworm and anti-mold. All the materials are signed CE and the structure is certified REI 30.

With reference to Italian law.

To realise the Storage is necessary an authorisation issued by the competent institutions according to the following procedure:

  • Identification of the area and the urbanistic restrictions
  • Preparation of planimetric board with a ray of about 500 meters (scale 1: 5,000) with the present activities underlined (cableways identified, homes, shelters etc.). 10,000 scale map extract to exclude presence of influential activities
  • Perform technical audits to the technological services (electricity and telephone coverage energy for security systems)
  • Prepare a report with quantitative calculations that can be held
  • PS authorization request to the Prefect accompanied by: house technical documentation, technical documentation Safety systems, relation of distances, report on accessibility
  • Urbanistic request to the municipality
+ Indications

The dimension of the shed is 200cmx200cm. The equipped area in which position the shed must be in a flat area with dimensions 13×13 m. This area will have to be delimited with a fence with a height of 3,5m in order to ensure a right prevention against intrusions. The perimeter will have to be subjected to video surveillance. In the centre will be realised an emplacement in reinforced concrete, raised at least 30 cm with respect to the walkable area, with dimensions of 4x4m. The shed will be placed in the centre of the emplacement with suitable anchoring means; in this way the shed will be surrounded by a sloping outwards sidewalk for the regular drain of the rain water or the snow melting from the roof.

+ Data Sheet

It is a laminated sprust wooden hut GL24H with internal dimension of 200 x 200 cm, external walls thickness 10 cm, gabled roof, internal height in the eaves h. 200 cm, heigh in full h. 250 cm, cover with gutters from 50 cm projection for every side, support structure in larch beams, cover in sandwich panel thickness 40 mm., finishing in brown sheet and single-wing door 80 x 200 h. cm.

 

All the laminated sprust wooden material GLH24 is treated with anti-woodworm and anti-mold. All the materials are signed CE and the structure is certified REI 30.

+ Info Utili

With reference to Italian law.

To realise the Storage is necessary an authorisation issued by the competent institutions according to the following procedure:

  • Identification of the area and the urbanistic restrictions
  • Preparation of planimetric board with a ray of about 500 meters (scale 1: 5,000) with the present activities underlined (cableways identified, homes, shelters etc.). 10,000 scale map extract to exclude presence of influential activities
  • Perform technical audits to the technological services (electricity and telephone coverage energy for security systems)
  • Prepare a report with quantitative calculations that can be held
  • PS authorization request to the Prefect accompanied by: house technical documentation, technical documentation Safety systems, relation of distances, report on accessibility
  • Urbanistic request to the municipality

For more info

[recaptcha]

For more info

[recaptcha id:rec1]